F2 data is not automatically updated?Solved!

April 6th, 2017

Recently, we received many comments about the temperature, height, Air-pressure, these features will not update automatically in F2.

This was the Fundo Bracelet issue, we’ve solved it in the new version. You just need to update it and it will update automatically.

But some of you still complain that the parameters remain the same, without any change. Here I want to make a statement why it will not be updated.

You need to know how the Fundo Bracelet works? First, you need to pair up your phone with F2; Second, enable mobile data, GPS on your phone.

Fundo Bracelet will access the yahoo weather and get all information you need. And then F2 will read the information and display it on the screen. The app will update automatically every two hours.

Of course, you need to update the Fundo Bracelet first. Check it out now, everyone forgot to enable the GPS on their phones. Enable it and you’ll get the update automatically.

Updated! I just heard that a xda member found that Wifi will affected the connectivity between F2 and your phones. You need to turn off your wifi before you pair up your devices, but you can activate it after you pair them up.

New app and new firmware is available. Please check it on Google Play, after update to the latest version, there will be a new firmware available. June 1 update.

You can download the Fundo Bracelet here. https://play.google.com/store/apps/details?id=com.szkct.fundobracelet&hl=en

If you can’t download it from Google Play, you can download an apk here. https://drive.google.com/open?id=0B4Ay_s354RncQjZkdm4zRkpHcDg

This firmware resolves the previous issues AND the firmware now supports update every hour. Please update it and if you still questions or it doesn’t work for you, leave a comment below to help us solve it. Thanks.

You might also like


  • Diane Wallace

    Mar th, 2019 8:57 PM Reply

    The instructions as to how to sync to GPS and Apple health are nebulous at best. After several attempts at the links you provided, the FD application on my phone flashed “being connected” over and over. I had to turn the phone off and completely start over. Although allowing access to GPS location, the temperature, etc. is still wrong; and it still does not record all my steps.

  • Daniel

    Jul th, 2018 8:27 PM Reply

    My fundo bracelet is always set to 9 degrees and sunny. I have Yahoo! Weather installed but it never updates. Not sure why.

  • GUILHOT Jean

    Apr th, 2018 12:09 AM Reply

    I have a problem of unit of temperature (Farenheit instead of Celsius) et distance (miles instead of meter or kilometer) . When i install APP unit are in celcius and kilometer but as soon as i restart my phone it’s again Farenheit and Miles wich appears. I have fundo bracelet in last version 2.3.1 Firmware V0.0.8 ; the bracelet is Y-mcb71

    • Jon

      Apr th, 2018 5:08 PM Reply

      Hello Guilhot, sorry, I’m not familiar with this bracelet. There is no option to change the unit of temperature.


    Apr rd, 2018 5:25 AM Reply

    no consigo emparejar el reloj con el movil funciono un tiempo bien y de buenas a primeras no empareja

    • Jon

      Apr rd, 2018 10:25 AM Reply

      Hello Antonio, unbind and reconnect will help. You can also restart your watch and phone, after that pair up them.

  • Bogdan

    Jan th, 2018 4:02 AM Reply

    Hy, I have purchased recently a F2 Smart Watch and i can say that the information related to temperature, pressure, UV and height is not updating. Also there is a poor connection between watch and telephone (Samsung J5). The firmware is latest 2.6.4 and the app the same 2.2.9. Thank you

    • Jon

      Jan th, 2018 11:38 AM Reply

      The temp, pressure, uv, you can refresh the app to update them. Just go to the Fundo bracelet, slide down to refresh it.

  • Glenn

    Aug nd, 2017 2:18 AM Reply

    Thanks for the reply but when I started the phone and app it said 20c half hour later it said 68 which is F. everyone else seems to be on centigrade?

    • Jon

      Aug nd, 2017 10:27 AM Reply

      Hi Glenn, is the temp correct? The two results which is correct? I’ll see if there is a way to change it.

      • Glenn

        Aug nd, 2017 12:48 PM Reply

        Yes temp correct but I would like it in C again like everyone else

  • Glenn

    Aug st, 2017 12:01 AM Reply

    how can I change the temp from F to C?

    • Jon

      Aug st, 2017 12:41 PM Reply

      Hi Glenn, nope, no such settings, sorry.

  • Jorge

    Jul th, 2017 10:44 PM Reply

    Hi, I have a simple question: There is a way to configure the time in AM/PM format? I tried to do that but I can´t…

    • Jon

      Jul th, 2017 11:40 AM Reply

      Hi Jorge, sorry, no such option.

  • Rather Asif

    Jun th, 2017 7:21 AM Reply

    Fundo Bracelet App Should Access the The Google App Instead Of Yahoo Weather

    • Jon

      Jun th, 2017 11:56 AM Reply

      Hi Rather, did you mean Google App will be more useful. But I’m not sure if google will give us the permission.

  • owen

    May th, 2017 6:26 PM Reply

    Bracelet does not update using Samsung S8, what crap is this?

    • Jon

      May st, 2017 1:02 PM Reply

      Hi owen, check the Fundo Bracelet, if there is an update available. Also check the firmware on Fundo Bracelet, upgrade the firmware to the latest version, and the data will update automatically.

  • Constantin

    May th, 2017 6:14 PM Reply

    Hi, i just bought one of ur f2 Smartwatch, nice look great quality. Can u upload a video on yt on How can we change battery? For the moment is one video but i can’t understand how actually can we pull the head of the pins out from the holes. Ths.

    • Jon

      May th, 2017 11:19 AM Reply

      Hi constantin, you need something sharp to pry open the pins.

  • Peter

    May th, 2017 12:44 AM Reply

    I can’t update to 2.6 from 2.5.5
    The finctionality is very limited!
    No sync from Yahoo, no üdv, temp, altitude, etc. sync! That’s a fake app and watch without sensors.

    • Jon

      May th, 2017 10:38 AM Reply

      Hi Peter, don’t worry, we are going to release a new firmware. The new firmware will solve the issue. And the new app will also release, please be patient. Thanks.

  • david

    May st, 2017 8:17 PM Reply

    is the g8 watch have a ip68 rateing

    • Jon

      May nd, 2017 3:00 PM Reply

      Hi david, nope, G8 is not waterproof.

  • Andy

    Apr st, 2017 10:16 AM Reply

    I have updated the FundoBracelet application to version 2.1.6
    in this version I managed to update no. 1 f2 to version 2.5.6
    Remained weather synchronization problem
    Not consistently displayed data with well and steps

    • Jon

      Apr st, 2017 10:56 AM Reply

      Hi Andy, we’re still working on this issue, sorry for the inconvenience. Once we solve this issue, we’ll inform you immediately.

  • Larry

    Apr th, 2017 4:03 PM Reply

    Hi i have a F2 bracelet and Huawei P8 lite, with GPS and LTE data connection enabled, i can’t update data in the phone and in the bracelet.
    My app version is 2.1.4 and bracelet 2.5.2 .
    i see that in Milan my phone and bracelet update only one time temperature and other info, in Rome my phone and bracelet not update the weather info. Can you help me to understand?

    • Jon

      Apr th, 2017 4:06 PM Reply

      Update the Fundo bracelet, the latest version is 2.6. And then you can update your F2 firmware.It’ll solve this issue.

      • Larry

        Apr th, 2017 7:21 PM Reply

        i have update app to 2.1.6 by googleplay ad bracelet firmware to 2.5.6 but data not update on my phone/bracelet.

        • Larry

          Apr th, 2017 7:27 PM Reply

          I have available on googleplay 2.1.6 for app and 2.5.6 for firmware( in app ) where can i download the 2.6?

          • Jon

            Apr th, 2017 5:57 PM

            Hi, 2.1.6 is the latest version, but it seems that this version doesn’t solve this issue. 🙁 Hold on there, I’ve contact our engineers, hope they’ll solve it soon.

  • Andy

    Apr th, 2017 11:45 PM Reply

    I have a ASUS zb500kl installed FundoBracelet 2.1.4.
    This program shows that the firmware on the No. 1 F2 2.5.2 and not update to 2. 5, 5.
    so do not correctly display data temperature height and , although annex yahoo properly defined location

    • Jon

      Apr th, 2017 4:51 PM Reply

      Hi Andy, you can download the latest version on Google Play.

      • andy

        Jun st, 2017 1:13 PM Reply

        I have a ASUS zb500kl installed FundoBracelet 2.1.8.
        This program shows that the firmware on the No. 1 F2 2.5.9 and not update to 2. 6.3.

        • Jon

          Jun nd, 2017 12:04 PM Reply

          Hi andy, thanks for this feedback, we’ll try to figure it out what’s going wrong.

  • Ignacio

    Apr th, 2017 4:43 PM Reply

    Thanks Jon,
    The spanish users of F2 are waiting this fix, we will report you the result of your update ASAP.

    • Jon

      Apr th, 2017 5:53 PM Reply

      Hi Lgnacio, have a good day. Once we’ve a solution we’ll inform you.

  • Ignacio

    Apr th, 2017 3:35 PM Reply

    Firmware version 2.5.5
    Fundo bracelet version 2.1.4
    Only altitude data is parsing, rest of variables empty(uv,temperature and pressure).
    Dream analytic is also doing wrong.

    • Jon

      Apr th, 2017 4:10 PM Reply

      Thanks for your feedback. We are working on this, once we’ve a solution we’ll inform you immediately.

  • Ignacio

    Apr th, 2017 8:10 AM Reply

    Ive tried this tutorial and the indicators:uv, pressure and temperature not update any value. My phone have been a complete day with gps, data on and yahoo weather active.
    Only altimeter works and update the value.

    • Jon

      Apr th, 2017 10:49 AM Reply

      Thanks for your feedback, did you update the Fundo Bracelet app? And what is your F2 firmware version? Because we have tested several F2, all the parameter will update every two hours.

  • Juan Carlos

    Apr th, 2017 5:37 PM Reply

    El No1 f2 sigue sin poder actualizar los datos de temeratura, altitud y lw. Probado en varios moviles y siguiendo su procedimiento (activar gps). Si saben como resolver este problema o otra app diferente me gustaria que me informasen. Un saludo

    • Jon

      Apr th, 2017 10:58 AM Reply

      Hi Juan, the temperature will update every two hours. You should activate the GPS all day and check it after two hours. F2 will access yahoo weather and update automatically.

      • Juan Carlos

        Apr th, 2017 6:18 PM Reply

        Gracias por contestar, la app fundo bracelet sigue sin funcionar, he estado 2 dias con gps activado y reloj vinculado y no actualiza nada.

        • Jon

          Apr th, 2017 6:30 PM Reply

          Hi Juan, this is known issue,we’re still working on this. Thanks for your feedback.

Leave Your Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.